Yacht Repeater
Yacht Repeater

A large display, mast mounted, multifunction repeater is now being produced at our factory. The weatherproof repeater with its 60mm high numerals, is supplied complete with cables, data-box with six NMEA-0183 inputs ( With up to six sentences per input.), wireless remote control, stainless steel mounting brackets and weather cover. There are nine levels of red back lighting which permit easy night viewing of red characters on a black background. The overall case size is 211mm wide x 140mm high.

Currently programmed in are the screens shown below though we do welcome customer feedback as we will add to this list by popular demand.

 

£310.67 Add to basket
Supernova Combi Tri and Anchor L.E.D mastlight
Supernova Combi Tri and Anchor L.E.D mastlight

Supernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.

A simple two wire connection powers the Combi light. Connecting the red wire to positive and the black wire to negative will illuminate the tricolour light. Reversing the connections will illuminate the anchor light.
A pre-wired toggle switch is supplied with the Combi light to facilitate the supply reversal.

In the central position both lights are off. Switching left or right selects the required lighting configuration.

Supernova navigation lights are intended for use on vessels up to 12 metres in length. They comply with CE generic EMC standards and are waterproof to IP65 and IP67. There is no specific EU standard for LED navigation lights. Supernova lights do not have any national approvals.

Supplied with pre wired switch and mounting bracket.

£145.62 Add to basket
Supernova
Supernova

Supernova lights use high efficiency LEDs ensuring long life and low power consumption. A tough polycarbonate shell protects Supernova from the elements while a Gore-Tex membrane vent ensures equalization of pressure on the seals.

Supplied with mounting bracket.

£65.03 Select options
Stingray Echo Sounder
Stingray Echo Sounder

The NASA Stingray Echo Sounders come in a slimline case with an easy to read extra bright LED display on a 4 inch dial. They both have a dual audible alarms for shallow and deep water which can be set to give two ranges either 1-25 metres or 1-100 metres, and are simplicity itself to operate. They come complete with transducer and stirrup mounting bracket and only require connection to the ships 12v power supply.

Sadly, as some component parts have been increasingly difficult to source this product is no longer in production. Anyone who has one can fit any of our digital depth sounders to the same Stingray depth transducer.

Read more
20W Semi Flexible SOLAR PANEL
20W Semi Flexible SOLAR PANEL

At just 3.5mm thin our weather proof panels are tough enough to withstand being stepped on when wearing soft soled shoes

A solar panel can provide a near maintenance free solution to keeping batteries charged when unattended. An occasional wipe with a damp cloth is all that is necessary to ensure the panel continues to trickle energy into the battery. Keeping the battery topped up will improve its reliability and can extend its useful working life. Whilst solar panels give their maximum output in direct sunlight, even an overcast day can provide a useful level of charge.

The Nasa Marine 12 volt, semi flexible solar panel is robustly constructed on a fibre glass substrate and are protected by a scratch proof transparent Tedlar polymer. Only 3.5mm thick and lightweight, they have no metal outer components to make contact with the surface to which they are fitted.  The efficient and stable polycrystalline cells are encapsulated between two tough outer layers so the whole panel is weatherproof and carries a limited one year warranty.

The panel can be gently flexed (in one dimension.) to follow a smooth curve, such as a coach roof, by up to 2.5cm per 100cm of panel length. Four, grommet finished, holes are provided for screw fixing. Alternatively panels can be glued into position using mastic. The panels do not contain glass and, when correctly mounted, can be stepped upon when wearing soft soled shoes.
A sealed junction box is fitted with 2.5m of output cable, a connector and fuse protected crocodile clips. Electrical connection is simple though the use of a solar regulator is recommended to prevent overcharge if the system is to be left unattended for long periods or the solar panel to battery ratio exceeds the minimum of 10W to 100Ah.  An internal blocking diode prevents reverse current drain at night. The panel is protected with an inline 3 Amp fuse.

The 20W panel measures 510 x 360mm

 

£130.91 Select options
MOBi MOB Indicator
MOBi MOB Indicator

The Nasa MOBi is a state of the art, fail-safe transponder man overboard system. It consists of a base unit and up to eight active transponders for crew or valuable equipment. In operation the base station sequentially interrogates each transponder which then broadcasts its presence. In the event of a crew member falling overboard the drop in signal level is detected by the base unit which sounds a high intensity audible alarm. To aid identification of the missing crew member the base station continually displays the names of all the crew currently logged on, the signal levels of their transponder fob and their current status. Three AAA cells power each transponder for several weeks of continuous use. Should the base station be turned off the transponders will go to sleep with a life of several years. So if you are sailing with Tom, Dick and Harry don’t forget to take MOBi with you!

£306.37 Add to basket
Gas Monitor
Gas Monitor

Liquified petroleum gas (LPG) is an invaluable source of energy on many sailing vessels. It should, however, be used with great care. In its gaseous form it is heavier than air and will always collect at the lowest level in a vessel. Any leak of gas, any spillage of liquid could sink to the bilge and, unable to escape, build up to explosive proportions.

The NASA Marine gas detector system warns if the level of LPG rises above 10% of the lowest explosive limit (LEL) giving adequate warning of the need to ventilate the area before a dangerous situation occurs. The system consists of a cabin mounted monitor and a remote sensor. The monitor gives visual and audible warning if gas levels at the sensor rise above 10% LEL and will warn of fault conditions such as damaged cables etc.
The splash proof sensor is supplied with a 5 metre cable and has a test button to check the system right through to the gas sense element. The sense element is user replaceable in the event of contamination.  Supplied with power cable.

£89.16 Add to basket
EX-1 exhaust temperature monitor/alarm
EX-1 exhaust temperature monitor/alarm

The EX-1 continually displays the exhaust gas temperature in wet exhaust systems giving advanced warning of potential problems.

The EX-1 measures the exhaust gas temperature directly and displays it in degrees centigrade or Fahrenheit. Once the normal working temperature has been established a maximum temperature, a few degrees higher, can be programmed into the EX-1 which will then sound an alarm if that temperature is exceeded.Even a small rise in temperature can indicate a potential problem such as a minor blockage, leak or failing pump which can be corrected before a complete failure occurs.

Customer review

I just wanted to share with you another great reason for having the EX-1 fitted. Over the last few weeks of using our boat I observed that the running temperature had gone up around 5 degrees or so. Now with using the boat in the winter one would expect the reverse, so it caused me to think more about it. Added to that, when I did use the engine at full revs on load (something I do regularly just as a check) the exhaust alarm went off (it doesn’t normally.) I then observed the seawater tell-tail was more pronounced (the tell-tail feed is off the line between the Jabsco pump and the inlet to the cooler. Hmmm: possible blockage? I removed the impellor and true enough, one of the vanes had come off. On stripping the cooling system (I was already working on the leaking silencer) I found one part of the impellor up against the tube stack, but more importantly, when I removed the hose feeding the tube stack, via a small elbow, I found a larger part of the impellor jammed inside, reducing the flow by as much as 50% and causing s sediment build up behind it, reducing it further. All cleaned out now, but the reason for telling you is that the EX-1 gave me warning before any real damage could have been caused. It is a brilliant piece of kit.

 

£117.40 Add to basket
Cruiser Compass System
Cruiser Compass System

Contemporary Design

£204.30 Add to basket
Cruiser Depth System
Cruiser Depth System

Contemporary Design

Cruiser Depth is supplied complete with transducer, weather cover etc.

£132.07 Add to basket
Cruiser Speed & Distance Log
Cruiser Speed & Distance Log

Contemporary Design

The Cruiser Log is simple and reliable showing speed in knots, trip distance to 999 nautical miles and total distance run up to 999 nautical miles.

It is supplied with a through hull paddle wheel unit designed for installation on most GRP type hulls, weather cover and blanking cap.

 

£132.07 Add to basket
Target Compass System
Target Compass System

All instruments in the Target Range come complete with sensors or transducers as appropriate and all necessary fittings. They provides accurate readings for owners of sailing craft and powerboats alike.

The Target Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has backlit illumination for night viewing and gives True or magnetic heading. The sensor which is gimballed for plus/minus 30 degrees of pitch and roll, is mounted in a position where stray magnetic fields are at a minimum. An electronic auto calibration then cancels out small errors.

£180.60 Add to basket
Gas Sensor Box with cable
Gas Sensor Box with cable

Spare remote gas sensor unit. Supplied complete with a 5 metre cable and test button to check the system right through to the gas sense element.

 

 

£51.60 Add to basket
Target Wind Speed & Direction V2 (Apparent)
Target Wind Speed & Direction V2 (Apparent)

All instruments in the Target Range come complete with sensors or transducers as appropriate and all necessary fittings. They are designed to run on 12v supply, but due to the very low power consumption there is no reason why they cannot run off dry batteries. They provides accurate readings for owners of sailing craft and powerboats alike.
Designed for long term maintenance-free performance, the Target Wind Speed and Direction instrument is robust in manufacture and simple in operation. Initial set-up aligns the boats head with the wind indicator, so the masthead unit can be mounted in any convenient location and is not bound to fore-aft mounting.

£226.54 Add to basket
Target Depth System
Target Depth System

All instruments in the Target Range come complete with sensors or transducers as appropriate and all necessary fittings. They are designed to run on 12v supply, but due to the very low power consumption there is no reason why they cannot run off dry batteries. They provides accurate readings for owners of sailing craft and powerboats alike. The biggest selling marine instrument world-wide is still the depth Sounder. In the Target Sounder you will find all the necessary features of much higher priced units including keel offset, shallow and deep water alarms, and a depth range of 1 – 100 metres.

£118.52 Add to basket
Target Speed & Distance Log
Target Speed & Distance Log

All instruments in the Target Range come complete with sensors or transducers as appropriate and all necessary fittings. They are designed to run on 12v supply, but due to the very low power consumption there is no reason why they cannot run off dry batteries. They provides accurate readings for owners of sailing craft and powerboats alike. Following the NASA design philosophy, the Target Log is simple and reliable showing speed in knots, trip distance to 999 nautical miles and total distance run up to 999 nautical miles.

The Target Log is supplied with a through hull paddle wheel unit designed for installation on most GRP type hulls.

£118.52 Add to basket
TRUE WIND DISPLAY
Clipper Tactical Wind System (Apparent and True)

A high performance instrument system that shows almost instantaneous changes of wind speed and direction.

In demanding conditions, where high performance is essential, the Clipper Tactical wind system is the ideal choice. With ten updates every second it responds very quickly to the changes in wind speed and direction, which occur during tricky manoeuvres. The sensor is supplied complete with a mast mounting kit, 20 metres of light weight cable and all necessary electrical connectors to complete the installation. The output data is in the NMEA 0183 format and can be used to drive any compatible display that utilises the MWV sentence.

£314.26 Add to basket
Clipper Close Haul Repeater
Clipper Close Haul Repeater

This connects directly to the master wind unit. As well as repeating the wind speed it shows wind direction in high resolution when sailing close to – or running with the wind. Complete with 5M cable.

£92.56 Add to basket
Clipper Log Repeater
Clipper Log Repeater

The Clipper Log Repeater repeats all data from the master unit.

£92.56 Add to basket
Clipper Depth Repeater
Clipper Depth Repeater

The Clipper Depth Repeater has its own independent alarm function as well as repeating all data from the master unit.

Note – this is not a stand alone unit and cannot be connected to a depth transducer.
It must be connecetd to the Clipper Depth master display unit.

£92.56 Add to basket
Clipper Wind Repeater/V2 – 3 wire mast unit display
Clipper Wind Repeater/V2 – 3 wire mast unit display

The Clipper Wind NMEA Repeater has user a selectable pointer style and selectable wind speed scale. It requires the standard NMEA 0183 MWV data sentence.

(Supplied as standard equipment to the Clipper Wind V2 – 3 wire wind mast unit and the Clipper Wireless wind unit.)

£92.56 Add to basket
Clipper GPS Repeater
Clipper GPS Repeater

The Clipper GPS repeater has quickly established itself as the market leader in cockpit GPS repeaters. Typical of the Clipper range it boasts large clear digits and simple operation. Installation coundn’t be simpler with just a single wing nut to fasten the unit into the panel and two wires to connect to the GPS.

£135.46 Add to basket
Clipper Wind System V2 (Apparent)
Clipper Wind System V2 (Apparent)

The Clipper Wind system shares the same 110mm square case as its sister instruments in the Clipper range. the display is exceptionally large and clear, with 60 segments for full 360 degree direction indication. Windspeed is shown in knots, M.P.H. or Metres/second. The pointer style is selectable, from the single segment shown above, to multi segments for greater clarity or a ‘windex’ style indicator. The masthead unit directly outputs NMEA 0183 output sentence MWV and is supplied with 20 metres of cable.

Clipper Wind system is supplied complete with Display unit, masthead unit with cable and mounting blocks.

£284.58 Add to basket
MK 1 Power Cable
MK 1 Power Cable

Power cable for orginal Stingray Log, Stingray Echo Sounder, Stingray Compass, Video Hydrograph and Video Navtex.

1 metre long.

£7.00 Add to basket
NMEA 0183 to NMEA 2000 Compliant converter
NMEA 0183 to NMEA 2000 Compliant converter

The product consists of a translator box which inputs the NMEA 0183 wind data sentence MWV. It translates the 0183 data into NMEA 2000 compliant wind data for connection via a ‘micro-c’ connector directly into an existing NMEA 2000 network.

 

Product video showing the system connected to a NASA Marine mast unit and Garmin GMI 20 NMEA 2000 repeater

AIS Engine

USER MANUAL

 

£86.44 Add to basket
NMEA 0183 to NMEA 2000 SPEED LOG Compliant converter
NMEA 0183 to NMEA 2000 SPEED LOG Compliant converter

The product consists of a translator box which inputs the NMEA 0183 speed log data sentences VHW + VLW.  It translates the 0183 data into NMEA 2000 compliant speed and distance data for connection via a ‘micro-c’ connector directly into an existing NMEA 2000 network.

 

 

 

 

£86.44 Add to basket
NMEA 2000 Compliant Wind System
NMEA 2000 Compliant Wind System

Now available – NASA Marine are delighted to announce the introduction of the new NASA Marine NMEA 2000 compliant wind system.

The product consists of our version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network.

NMEA 2000 Compliant Wind system is supplied complete with masthead unit, 20 metres of cable, mast head unit mounting hardware and the translator box with Micro C connector cable.

Available now.

 

Product video showing the system connected to a Garmin GMI 20 NMEA 2000 repeater

 

 

£271.68 Add to basket
Clipper Compass System
Clipper Compass System

The Clipper Compass is a fully electronic compass with remote fluxgate sensor. The large clear display has 7 levels of illumination and gives True or magnetic heading. The sensor which is gimballed for plus/minus 30 degrees of pitch and roll, is mounted in a position where stray magnetic fields are at a minimum. An electronic auto calibration then cancels out small errors.
Steer to course function
When the steering function is selected a series of chevrons accumulate showing the magnitude and direction of the steering error. To stay on course simply turn the wheel in the direction of the chevrons until they are extinguished. The steering sensitivity can be preset by the user. An off course alarm provides a safety feature when not at the helm. If the heading deviates by more than a preset amount then the alarm will sound.

£231.38 Add to basket
Data lead – HF3
Data lead – HF3

Spare data lead to connect audio output of HF3/W receiver to PC sound card

£6.46 Add to basket
Clipper Speed & Distance System
Clipper Speed & Distance System

Well proven paddle wheel speed and distance log with giant digits for easy viewing.

The Clipper Log is supplied with a through hull paddle wheel unit with 7 metres of cable – designed for installation on most GRP type hulls, Clipper display unit, weather cover and blanking cap.

 

£174.96 Add to basket
Clipper Depth System
Clipper Depth System

Best selling Depth sounder with giant 40mm high digits for easy viewing. The outstanding Clipper range of instruments incorporate technically advanced electronics in an industry standard 110mm square case. Supplied complete with in hull depth transducer with 7 metre cable.

£174.96 Add to basket
Clipper Duet System
Clipper Duet System

Best selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting.
The Clipper Duet is supplied complete with paddlewheel transducer (for installation on most types of GRP hulls) and in hull depth transducer.

 

£234.78 Add to basket
Clipper Wireless Wind (Apparent)
Clipper Wireless Wind (Apparent)

The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit.

The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication.

  • Wireless wind speed and direction data to any compatible NMEA display
  • Easy installation with mast in place – no wires to run down
  • Simple masthead alignment through base unit
  • Light mast unit weight – 190 grams

£399.40 Add to basket
Clipper Wireless Wind (True)
Clipper Wireless Wind (True)

The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper True Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the display.

The Clipper True Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. The display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction.

  • Wireless wind speed and direction data to any compatible NMEA display
  • Easy installation with mast in place – no wires to run down
  • Simple masthead alignment through base unit
  • Light mast unit weight – 190 grams

 

£426.00 Add to basket
Cruiser Wireless Wind (Apparent)
Cruiser Wireless Wind (Apparent)

The Cruiser wireless wind is supplied with a wireless masthead transmitter, a base unit and a Cruiser Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Cruiser Wind display or any other compatible NMEA display unit.

The Cruiser Wind display measures 132 x 98 x 29mm. It has an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

  • Wireless wind speed and direction data to any compatible NMEA display
  • Easy installation with mast in place – no wires to run down
  • Simple masthead alignment through base unit
  • Light mast unit weight – 190 grams

 

£386.50 Add to basket
Target Wireless Wind (Apparent)
Target Wireless Wind (Apparent)

The Target wireless wind is supplied with a wireless masthead transmitter, a base unit and a Target Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Target Wind display or any other compatible NMEA display unit.

The Target Wind display measures 132 x 98 x 30mm. It has an exceptionally large and clear display with 60 segments for full 360 degree direction indication.

  • Wireless wind speed and direction data to any compatible NMEA display
  • Easy installation with mast in place – no wires to run down
  • Simple masthead alignment through base unit
  • Light mast unit weight – 190 grams

 

£359.40 Add to basket
Clipper Easy Log
Clipper Easy log

EASY LOG – the Log with no moving parts

The Clipper EASY LOG shows speed, trip and total distance on a high visibility liquid crystal display. It utilises the RMC sentence from any GPS or plotter with an NMEA 0183 output. Alternatively the EASY LOG can repeat, using sentences VHW and VLW from an existing NMEA log.

£92.56 Add to basket
Spare Cable Gland
Spare Cable Gland

Waterproof Cable gland to suit 3mm to 6mm diameter cables. Supplied as standard equipment to the Clipper pod.

£2.00 Add to basket
TARGET WIND DISPLAY (MK1 FIVE wire)
TARGET WIND DISPLAY (MK1 FIVE wire)

Target Wind display connects to the MK1 5 wire mast head unit.

£90.08 Read more
TARGET WIND NMEA INPUT DISPLAY
TARGET WIND NMEA INPUT DISPLAY

Target Wind display unit that connects to NMEA 0183 MWV data. This can be from the NASA Marine V2 – 3 wire wind sensor,  the NASA Marine wireless wind sensor or any other manufacturers product with the correct output.

£90.08 Add to basket
75cm MK1 Wind masthead unit cable
75cm MK1 Wind masthead unit cable

Spare original equipment cable for the MK1 5 wire wind masthead unit. This is hard wired into the mast unit. Fitted with 5 pin DIN socket to attach to the 5 wire 20 metre mast cable connector.

£12.90 Add to basket