Spare Shunt 100 Amp
50 millivolt 100 Amp shunt for Clipper BM-1, BM-1 Compact and BM-1 Bluetooth
ct
Spare Shunt 200 Amp
50 millivolt 200 Amp shunt for Clipper BM-2 and BM-2 Compact
Depth Transducer (with 7 metre cable)
Spare 150kHz depth transducer with 7 metre cable
Complete Paddle Wheel Unit
Spare complete log impellor unit with skin fitting and 7 metre cable
20 metre wind extension cable (for 5 wire masthead unit)
20 metre long extension cable for MK1 – 5 wire wind instruments.
Note there are two versions available:
Version 1 has PLUG for display connection.
Version 2 has TERMINAL BLOCK for display connection.
Antenna rail mount bracket
Mounting bracket for 25mm horizontal rail
to suit Series 2 Navtex, Weatherman, Navtex 518Khz and HF antennae.
20 Metre Wind cable – spare (V1 FIVE WIRE)
Spare 20 metre cable as supplied as standard for MK1 – 5 wire Clipper, Target and Cruiser Wind. It has the masthead connector at one end, the other end is stripped and tinned wires.
Clipper Pod
Clipper Pod. A robust POD moulding to suit 2 x Clipper Cockpit display units. Suitable for open cockpit mounting.
Supplied with 2 x 2 metre coaxial cables and 2 x cable glands for mounting the Clipper Log and Clipper depth
MOBi Fob
MOBi Fob
Single Fob transmitter for pairing with the MOBi man overboard system
Paddlewheel + spindle
Spare paddlewheel and spindle, simple fit for all Clipper, Target and Cruiser Logs.
V2 MHU Connetor block
Spare connector block for connecting 3 wire Wind display units to the 3 wire Masthead unit cable.
Wind Anemometer Cup Kit
Spare anemometer cup assembly with fixings and illustrated fitting instructions
Select correct type for your model
Type – Clipper, Target, Cruiser Wind Version 1 – five wire mast head units*
*If your mast unit has or had a red coloured wind vane fin you require the Version 1 – five wire type.
Type – Clipper, Target, Cruiser Wind Version 2 – three wire mast units, Wireless and Tactical masthead units*
*If your mast unit has or had a red coloured wind vane fin you require the Version 1 – five wire type.
Wind vane kit
Spare wind vane assembly with fixings and illustrated fitting instructions
For Clipper, Target, Cruiser and Wireless, Tactical masthead units
IMPORTANT – Select correct type for your model
Clipper / Target / Cruiser Version 1 – five wire mast unit
Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit
In hull transducer mounting kit
Complete kit for mounting depth transducer inside GRP hull
AIS Engine 3 upgrade processor
The AIS Engine 1 and 2 can be upgraded to AIS Engine 3 specification by replacing the processor. This is a straightforward procedure where the old device is simply unplugged from its socket and replaced by the new device. AIS Engine 3 relays all AIS messages.
AIS RADAR SART UPGRADE CHIP
This ‘do it yourself’ install chip will enhance your AIS Radar by adding the latest SART function. If a SART (search and rescue transponder) transmission is received the AIS Radar will sound an alarm in the SOS tone. The zoom range is also enhanced by zooming right down to 0.125 nautical miles for easier location of the SART beacon/MOB. Additionally a course over ground pointer can be activated by the user which appears if your vessel is moving at 2 knots or more, this greatly simplifies the interpretation of targets on the screen relative to your own boats heading.
SHUNT CABLE 100 AMP
Spare 100 Amp shunt cable for the Clipper BM-1, BM-1 Compact or the BM-1 Bluetooth
PL259 nickel plated male connector
High quality male connector, nickel plated with silver tip and teflon insulator. For coaxial cable RG 58.
SHUNT CABLE 200 AMP
Spare 200 Amp shunt cable for the Clipper BM-2 and BM-2 Compact battery monitors
Spare 20 metre V2 Wind masthead cable – (V2 THREE WIRE)
Replacement 20 metre mast cable for the Clipper, Target and Cruiser V2 three wire wind systems.
Spare antenna base bracket
Spare antenna base bracket with new ‘O’ ring and cable gland
RG 58 10 m Cable pack
Coaxial cables are vital to the performance of your antenna and radio system. Selecting the best coaxial cable has become more and more complicated as more suppliers are offering a broader range of products. The cable selected will affect the system’s cost, coverage and reliability. That’s why for our antennas we only use one type of coaxial cable, the TOP PERFORMANCE RG 58 CU MIL, designed to guarantee the best signal transmission.
14 tpi 25mm Rail Mount Bracket
Bracket for mounting Navtex and VHF antenna on 25mm rail. Standard 14 tpi marine mount. Solid nylon.
Four way chrome brass ratchet mount
The PA-33 is designed for deck or side mounting, with an opening for a coax cable. It’s made of chrome brass and allows the antenna to fold down in four ways with a quick release. 1” x 14 thread. Supplied with fitting set. Ideal for 2,4 m long antennas.
Four way solid nylon ratchet mount
The PA-3 is designed for deck or side mounting. It’s made of UV resistant reinforced nylon and allows the antenna to fold down in four ways with a quick release. 1” x 14 thread. Supplied with fitting set.
In stock
two way solid nylon mount
Light and UV resistant, designed for deck or side mounting. It’s made of UV resistant reinforced nylon and allows the antenna to fold down in two ways. 1” x 14 thread.
In stock
KS-23A VHF Stainless Steel Antenna 0,9m – motor
SCOUT has designed the KS-23A antenna specifically for small boats and RIBs, that require a light antenna, flexible, resistant and with high performance. The KS-23A brings all these features together in only 90 cm length. The stainless steel whip guarantees high flexibility and resistance, the design is noble and smooth as needed with small boats and RIBs. Standard thread 1” x 14.
KM-3A VHF Stainles Steel Antenna 1,0 – sail
The KM-3A antenna is developed for sailing boats. It combines lightness and flexibility due to the quality stainless steel whip. Its elegant style fits perfectly with the boat design. The antenna is supplied together with a stainless steel mounting bracket, that makes the installation quick and stable.
Delivery – 2 weeks
KM-10 VHF Fiberglass Antenna 18cm – sail and motor
With only 18 cm length the KM-10 is the shortest VHF antenna of the range, and it is distinguished by its elegant look and glossy chrome finishes. Designed for fast and small boats, thanks to its versatility it is equally adaptable also to sailboats and medium sized boats. It is equipped with a stainless steel bracket that makes the installation easy and stable, and gives the antenna a perfect stability even during fast navigation and rough sea. It is equipped with 18 m RG 58 coaxial cable and a PL 259 male connector.
Electromagnetic Log skin fitting
Spare skin fitting for Electromagnetic Log transducer. Supplied with rubber sealing ring and retaining nut.
KS-21 VHF Fiberglass Antenna 0.9m – motor
The new KS-21 is the perfect antenna for small boats and RIBs. With only 90 cm length it guarantees the same performance of 150 cm length VHF antennas. Anti – UV high gloss finish and 100% WATERPROOF. The new vinyl plastic cap, navy blue, provides a quality, finished appearance to the antenna and it’s extremely resistant to high temperatures. The 5m top performance RG 58 cable completes the characteristics of the KS-21, an antenna that is perfect for its design and construction.
Clipper Clamp Bracket for Clipper cockpit instruments
Spare clamp bracket for Clipper cockpit instruments. Fits Clipper Depth, Log, Duet, Wind, BM-1 etc.
Electromagnetic Transducer Blanking Plug
Spare blanking plug to seal the skin fitting when cleaning the electromagnetic transducer.
Supplied as original equipment.
KM-3F VHF Fiberglass Antenna 0,9m – sail
The KM-3F antenna is developed especially for sailing boats. It combines lightness and flexibility with an extreme resistance to atmospheric agents. Its elegant style fits perfectly with the boat design. The antenna is supplied together with a stainless steel mounting bracket, that makes the installation quick and stable.
In stock
KS22 – VHF Fiberglass Antenna 1.5M – motor
There’s no need to introduce this classic of marine communication. The antenna that has become a standard for users now meets the excellence of the patent 100% WATERPROOF. The special paint with anti-UV filter avoids the deterioration of the colouring and keeps the whip shining white. The best seller becomes the best performer.
Spare M5 wing nuts (pack of 4)
Pack of 4 x stainless steel wing nuts as fitted to Clipper, Target and Cruiser instruments.
Target Navtex Mount Bracket
spare Stirrup mounting bracket for Target Navtex
(Supplied as original equipment with Target Navtex)
KS-30 AIS Fibreglass Antenna 0.9M
The Automatic Identification System (AIS) is an automated
tracking system used on ships and by Vessel Traffic Services (VTS)
for identifying and locating vessels by electronically exchanging data
with other nearby ships and VTS stations. AIS transponders use two
different frequencies, VHF maritime channels 87B (161.975 MHz) and
88B (162.025 MHz). SCOUT has designed the KS-30 antenna to be
tuned on the AIS frequencies. Perfectly suited to the AIS radar and AIS Engine.
Spare paddlewheel ‘O’ rings (pair)
Pair of replacement ‘O’ rings for the paddlewheel log transducer
Supernova Combi Switch assembly
Spare pre-wired switch for the Supernova Combi LED light
AIS SART Plotter
The Nasa Marine AIS SART Plotter is the first stand alone AIS receiver / plotter specifically designed for the leisure boat market.
The unit consists of a dual frequency AIS receiver, demodulator, signal processor and a backlit matrix display. It receives an NMEA input (RMC) from the boats GPS which puts the user at the centre of a radar style screen. A COG pointer is selectable by the user. All AIS carrying vessels and SART transponders are displayed with bearing and range relative to the user. Any vessel on the screen can be selected by the user. The selected vessel is highlighted and its data displayed on the right of the screen. This data includes the vessel’s MMSI number, name, course over ground, speed over ground, range, latitude and longitude.
The display, with ranges of 0.125, 0.25, 0.5, 1, 2, 4, 8, 16 and 32 nautical miles shows AIS carrying vessels and SART transponders in a format normally associated with conventional radar. A trail of previous positions clearly shows the relative track of all the targets on the screen. A box to the right of the screen displays the speed over the ground, the vessel name, mmsi number and the latidude and longitude of any target selected by the user.
As each vessel leaves a trail of previous positions the user can instantly see its relative position and bearing. Should any vessel cause concern (particularly if there is a risk of collision) it can be selected and its AIS data displayed. The MMSI number is immediately available so, in the last resort, a DSC call can be made directly to that vessel. If the user selects his own vessel then the screen repeats the users GPS position, course and speed over ground.
Each vessel’s status is shown by a different symbol so the user can see if a vessel is underway, at anchor, fishing etc.
The compact unit has a white backlit LCD display, operates from 12 volts and consumes little power. It is designed for inside cabin mounting only.
*AIS SART Plotter is an AIS receiver only and does not transmit AIS data. It should not be confused with an AIS transponder.
The receiver requires connection to a stand alone VHF antenna or connected to a VHF/AIS antenna splitter.
Clamp bracket for Clipper cabin instruments
Spare clamp bracket for Clipper cabin instruments. Fits Clipper – AIS Plotter, Navtex, Weatherman, MOBi and Meteoman.
Ais Engine 3
The AIS Engine 3 is supplied with a free copy of ‘SeaClear’ and a trial version of Software on Board. A data cable to connect to the 9 pin serial port of a PC and a 12 volt power cable
The AIS Engine 3 and a conventional marine antenna are all you need to start plotting vessels on your PC or AIS compatible plotter. The software runs in windows 95, 98, ME, XP, 2000, NT and Vista, it includes a world map on which vessels are plotted. Any vessel on the screen can be selected and its AIS data displayed. This includes the vessels name, MMSI number, position, call sign and destination etc. Also included on the AIS Engine is an optional input for a GPS (RMC sentence). With this connected the users own vessel is shown on the chart with its latitude and longitude displayed in a window.
The unit can receive ships on either the A or B AIS channels. In default setting it alternates between the two channels.
The AIS engine can also be used with plotters or other PC software that have an AIS input facility. Check compatibility with your software supplier. An NMEA 0183HS input at 38,400 baud is required to accept the VDM AIS strings corresponding to ITU-1371.
If your PC does not have a spare 9 pin serial port a low cost serial to USB converter is available as an optional extra.
MeteoMan
For a yachtsman planning a voyage, the ability to predict the weather is essential.
The rate of change of barometric pressure and history of wind speed can be an invaluable indicator of imminent conditions.
Many sailors rely on low cost domestic barometers, which are inaccurate, have low resolution and very poor history. Several quality paper recording instruments exist but are delicate, fiddly to use and rely on paper which can jam when damp. The MeteoMan overcomes all these problems. It provides an accurate, high resolution barograph recording in excess of five days data on barometric pressure and wind speed. It is easy to use, reliable, rugged and draws very little power from the boat’s battery.
The Meteoman is available with an optional NMEA Wind sensor which provides wind direction, wind speed and external temperature. The Meteoman provides reliable meteorological information for the yachtsman. The main display shows the wind speed and direction, the ambient temperature and the barometric pressure.
To assist in predicting future trends the unit also displays a precision barograph and an anemograph showing barometric pressure and wind speed for the previous five days.
In addition to the meteorological functions the unit includes a marine chronometer, a stop watch, a race countdown timer, display of internal temperature and battery voltage.
MeteoMan can be connected to an NMEA Clipper Wind system where it will get wind speed/direction data via the Clipper wind output.
NMEA Wind Sensor supplied with mounting brackets and 20 metres of two core screened cable.
NMEA 0183 sentences: Wind speed/direction MWV Temperature XDR
Spare V2 20 metre wind masthead cable
20 metre long cable as supplied as original equipment for the V2 three wire Clipper, Target and Cruiser Wind systems. Fitted with moulded plug to connect to the short masthead unit cable. The other end is prepared to connect to the display unit.
Note – this is incompatible with 5 wire mast units.
NMEA Compass Sensor
Compact and waterproof NMEA compass sensor transmits NMEA 0183 sentence HDG to Clipper, Target and Cruiser or other equipment.
Meteoman masthead Unit *
Masthead unit for connection to the Meteoman Barometer.
The unit sends apparent wind speed and direction data via NMEA 0183 to Meteoman display. Complete with 20 metres of cable.
EASY LIGHT LED Luminaire
The NASA Marine 12 Volt Easylight luminaire contains 48 high efficiency LEDs in a slender surface mounting package.
The cool white version (CW) is recommended where maximum illumination is required and the warm white (WW) where a more natural light is preferred. Light output for the (CW) is typically 300 Lumens and typically 250 Lumens for the (WW).
The unit is designed for surface mounting directly on a ceiling or wall using the screws provided. It is not waterproof and is intended for use in a dry cabin only.
Mounting
When fitting ensure that the ventilation slots are not obstructed and take care not to over tighten the screws. When in operation the space behind the unit may get warm so avoid mounting on surfaces where this could cause a problem.
The power leads can be taken through a convenient hole in the mounting panel or alternatively through one of the end vent slots. Connect to a 12 volt DC supply via a suitable switch and a 1 Amp fuse. The red wire goes to the positive supply connection and the black wire to negative. (An internal diode protects the unit against supply reversal.)
Waterproof VHF Extension Speaker
Popular 5 watt waterproof extension speaker fits most VHF’s
Wind – Mast Mounting Tube
Spare mounting tube for 3 wire and wireless wind masthead units. (not suitable for 5 wire systems)
HF3W SSB Receiver
TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to ‘get on the air’ including a comprehensive instruction manual which includes a list of useful marine frequencies.
Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies.
The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant ‘correcting’ with the tuning knob so often associated with SSB signals as the receiver
is fully synthesised.
TARGET HF3/P
The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic long wire antenna, 12 volt power cable and instruction book.
TARGET HF3/W
The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world.
Requires PC Windows XP to 10.
