You may also like...
Instrument O ring
Spare ‘O’ ring to seal instrument displays to panel.
Select the type required from the drop down menu.
Select:
Clipper cockpit for Clipper Depth, Log, Wind, Compass, Duet, Easylog, BM-1/2 and GPS Repeater etc.
Clipper cabin for Clipper Navtex, AIS Plotter, Weatherman, Meteoman Barometer and Mobi man overboard indicator
Target for Target Depth, Log, Wind and Compass
Cruiser for Cruiser Depth, Log, Wind and Compass
Paddlewheel + spindle
Spare paddlewheel and spindle, simple fit for all Clipper, Target and Cruiser Logs.
Spare Shunt 200 Amp
50 millivolt 200 Amp shunt for Clipper BM-2 and BM-2 Compact
518Khz navtex antenna
Spare 518kHz antenna for older single channel Target navtex. Complete with 7 metre cable.
Wind vane kit
Spare wind vane assembly with fixings and illustrated fitting instructions
For Clipper, Target, Cruiser and Wireless, Tactical masthead units
IMPORTANT – Select correct type for your model
Clipper / Target / Cruiser Version 1 – five wire mast unit
Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit
HF Antenna power adaptor
HF3 has the power supply for the HF antenna built in since 2005 (Red label on back of radio chassis).
If you want to use the antenna for another receiver you will need this power adaptor to provide 12V.
HF3W SSB Receiver
TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to ‘get on the air’ including a comprehensive instruction manual which includes a list of useful marine frequencies.
Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies.
The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant ‘correcting’ with the tuning knob so often associated with SSB signals as the receiver
is fully synthesised.
TARGET HF3/P
The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic long wire antenna, 12 volt power cable and instruction book.
TARGET HF3/W
The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world.
Requires PC Windows XP to 10.
