- Spare low cost plug in catalytic sensor available
- Dimensions – W 134mm, H 70mm, D 28mm
Gas Sensor Box with cable
Spare remote gas sensor unit. Supplied complete with a 5 metre cable and test button to check the system right through to the gas sense element.
You may also like...
HF3W SSB Receiver
TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to ‘get on the air’ including a comprehensive instruction manual which includes a list of useful marine frequencies.
Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies.
The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant ‘correcting’ with the tuning knob so often associated with SSB signals as the receiver
is fully synthesised.
The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic long wire antenna, 12 volt power cable and instruction book.
The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world.
Requires PC Windows XP to 10.
Spare Shunt 200 Amp
50 millivolt 200 Amp shunt for Clipper BM-2 and BM-2 Compact
Depth Transducer (with 7 metre cable)
Spare 150kHz depth transducer with 7 metre cable
Wind vane kit
Spare wind vane assembly with fixings and illustrated fitting instructions
For Clipper, Target, Cruiser and Wireless, Tactical masthead units
IMPORTANT – Select correct type for your model
Clipper / Target / Cruiser Version 1 – five wire mast unit
Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit
Complete Paddle Wheel Unit
Spare complete log impellor unit with skin fitting and 7 metre cable