Technical Specifications
- Consumption, 10mA+ (25mA for display illumination max)
- 7 levels of display backlighting
- Display case size 110 x 110mm
- Depth behind panel 30mm
- Complete with 5 metre cable, ‘O’ ring and weather cover
You may also like...
Clipper Duet with Electromagnetic 3 Log transducer
The best selling combined Speed/Distance Log and Echo Sounder in standard 110mm square size. Suitable for open cockpit mounting.
The Clipper Duet is supplied complete with the solid state electromagnetic speed transducer (for installation on most types of GRP hulls) and in hull depth transducer. Supplied with the EML-3 electromagnetic transducer, the log measures the boat speed through the water with no moving parts. Robust and accurate, the sensor generates an alternating magnetic field below the boat and measures the resulting electric field produced by the boat moving through the water. With excellent linearity and a resolution of 0.1 Knot, over the range 0.2 to 40 Knots, the control box converts the sensor signal to a pulse output to connect to the Clipper Duet display.
Product video below. Shown with kind permission of one of our valued beta testers.
Clipper Wireless Wind (Apparent)
The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the Clipper Wind display or any other compatible NMEA display unit.
The Clipper Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication.
- Wireless wind speed and direction data to any compatible NMEA display
- Easy installation with mast in place – no wires to run down
- Simple masthead alignment through base unit
- Light mast unit weight – 190 grams
Clipper Speed & Distance System
Well proven paddle wheel speed and distance log with giant digits for easy viewing.
The Clipper Log is supplied with a through hull paddle wheel unit with 7 metres of cable – designed for installation on most GRP type hulls, Clipper display unit, weather cover and blanking cap.
Clipper Electromagnetic 2 Speed Log
The Clipper electromagnetic speed log measures the boat speed through the water with no moving parts.
Robust and accurate, the sensor generates an alternating magnetic field below the boat and measures the resulting electric field produced by the boat moving through the water. It is designed for installation into most types of GRP hulls.
With excellent linearity and a resolution of 0.1 Knot, over the range 0.2 to 40 Knots, the log sensor sends signals to a control box which then converts the sensor signal to boat speed, trip and total distance. This data is transmitted in NMEA 0183 format to a Clipper EM Log display unit.
Clipper Electromagnetic Speed Log Display
The new Clipper EM Log display unit connects directly to the EM Log 2 control box to display boat speed through the water with no moving parts.
Multiple displays can be connected to the EM Log 2 control box.
The speed is displayed with a resolution of 0.1 Knot, over the range 0.2 to 40 Knots, it also shows trip and total distance.
Clipper Easy log
EASY LOG – the Log with no moving parts
The Clipper EASY LOG shows speed, trip and total distance on a high visibility liquid crystal display. It utilises the RMC sentence from any GPS or plotter with an NMEA 0183 output. Alternatively the EASY LOG can repeat, using sentences VHW and VLW from an existing NMEA log.
Clipper Wireless Wind (True)
The Clipper wireless wind is supplied with a wireless masthead transmitter, a base unit and a Clipper True Wind display unit. The wireless masthead transmitter is powered by an internal battery which is charged from ambient light using a small solar panel. A few dull days will not affect performance. When fully charged, it is capable of two thousand hours of full operation in total darkness. The masthead transmitter sends data wirelessly to the base unit, which is powered by the vessel’s 12 Volt supply, the base unit receives wind speed and direction data from the masthead transmitter and sends it to the display.
The Clipper True Wind display is in the industry standard 110mm square case. Exceptionally large and clear display with 60 segments for full 360 degree direction indication. The display shows apparent wind speed and direction and, when connected to a log or GPS, it can also show true wind speed and direction.
- Wireless wind speed and direction data to any compatible NMEA display
- Easy installation with mast in place – no wires to run down
- Simple masthead alignment through base unit
- Light mast unit weight – 190 grams
Clipper Depth Repeater
The Clipper Depth Repeater has its own independent alarm function as well as repeating all data from the master unit.
Note – this is not a stand alone unit and cannot be connected to a depth transducer.
It must be connecetd to the Clipper Depth master display unit.
