You may also like...
KM-10 VHF Fiberglass Antenna 18cm – sail and motor
With only 18 cm length the KM-10 is the shortest VHF antenna of the range, and it is distinguished by its elegant look and glossy chrome finishes. Designed for fast and small boats, thanks to its versatility it is equally adaptable also to sailboats and medium sized boats. It is equipped with a stainless steel bracket that makes the installation easy and stable, and gives the antenna a perfect stability even during fast navigation and rough sea. It is equipped with 18 m RG 58 coaxial cable and a PL 259 male connector.
KS-30 AIS Fibreglass Antenna 0.9M
The Automatic Identification System (AIS) is an automated
tracking system used on ships and by Vessel Traffic Services (VTS)
for identifying and locating vessels by electronically exchanging data
with other nearby ships and VTS stations. AIS transponders use two
different frequencies, VHF maritime channels 87B (161.975 MHz) and
88B (162.025 MHz). SCOUT has designed the KS-30 antenna to be
tuned on the AIS frequencies. Perfectly suited to the AIS radar and AIS Engine.
H Vector Navtex Antenna
Conventional navtex antennas respond to the electrical component associated with the navtex radio signal. They usually perform well at sea where electrical interference is low but can sometimes be overwhelmed with interference especially when in harbour and connected to shore power.
In most small craft the electrical system acts as an effective ground for the antenna but it can also be a source of interference conducted from other electrical equipment on board. Electrical interference can result in poor reception especially in a marina where the ambient level is high or at sea when poorly suppressed electrical equipment is in use.
The omnidirectional H-Vector antenna is not sensitive to electric fields but to the magnetic component of the navtex signal. As a result it is less sensitive to locally generated interference and, as it does not need a ground, it is not affected by conducted ground interference whether in harbour or at sea.
The net result is that, under adverse conditions, the H-Vector antenna can deliver a significant improvement to navtex reception. The mushroom shaped antenna is compatible with the Clipper navtex, series 2 Target navtex and with the navtex engine. It can be mounted on a cabin roof or rail mounted using an appropriate threaded antenna base.
I am delighted with our new antenna. Our Navtex , normally somnolent in the marina, has burst into life!
Someone asked me recently – why bother with Navtex? My answer was simple. Last year a gale blew up suddenly on the Turkish Aegean coast. The Navtex transmitter at Izmir issued an urgent gale warning out of ‘normal hours’ and it was the only service to do so! For example there was nothing about this gale on PredictWind on our WiFi.
Now had a full month on the boat in Turkey cruising around and am even more delighted than ever with the new antenna!
John E – cruising in Turkey
KS-23A VHF Stainless Steel Antenna 0,9m – motor
SCOUT has designed the KS-23A antenna specifically for small boats and RIBs, that require a light antenna, flexible, resistant and with high performance. The KS-23A brings all these features together in only 90 cm length. The stainless steel whip guarantees high flexibility and resistance, the design is noble and smooth as needed with small boats and RIBs. Standard thread 1” x 14.