Supernova Mounting Bracket
Spare mounting bracket for the Supernova range of LED lights
Kit comprises of the anodised aluminium bracket, 2 x mounting blocks, 2 x M4 x 35mm stainless steel screws and 2 x M4 stainless steel Nyloc nut.
MK1 Wind mast unit (5 wire) without 20M cable
Masthead unit for all MK1 Clipper, Target and Cruiser Wind systems. It is fitted with a short cable with waterproof connector to connect to your existing 20 metre long cable/connector.
OUT OF STOCK – CONTACT US – info@nasamarine.com
BM-1/Compact/BM-2 spare 5 metre cable
5 metre cable for BM-1, BM-2 or BM Compact battery Monitors
Series 2 Navtex Antenna
Spare antenna complete with 7 metre cable – suitable for Clipper Navtex and Target Navtex 2 channel receivers
(Not suitable for single frequency receivers – see 518Khz type)
MK1 Mast Head Unit (5 wire) with 20M cable
Compatible with MK1 Clipper, Cruiser and Target Wind instruments with 5 wires.
Complete masthead unit with 20 metres of cable and mounting brackets
Legacy product – no longer available
Spare alarm buzzer – Clipper, Target and Cruiser Depth
Spare alarm buzzer for the Clipper, Target, Cruiser Depth sounders and AIS Radar/Plotter.
Clipper Wind Master Display MK1 5 WIRE
Spare Clipper Wind master display unit complete with weather cover
This connects to the 5 wire analogue output mast head unit.
Dust cover
Dust cover for Clipper Navtex, Weatherman, AIS Radar,
Meteoman and MOBi man overboard indicator.1
Instrument O ring
Spare ‘O’ ring to seal instrument displays to panel.
Select the type required from the drop down menu.
Select:
Clipper cockpit for Clipper Depth, Log, Wind, Compass, Duet, Easylog, BM-1/2 and GPS Repeater etc.
Clipper cabin for Clipper Navtex, AIS Plotter, Weatherman, Meteoman Barometer and Mobi man overboard indicator
Target for Target Depth, Log, Wind and Compass
Cruiser for Cruiser Depth, Log, Wind and Compass
HF Antenna power adaptor
HF3 has the power supply for the HF antenna built in since 2005 (Red label on back of radio chassis).
If you want to use the antenna for another receiver you will need this power adaptor to provide 12V.
518Khz navtex antenna
Spare 518kHz antenna for older single channel Target navtex. Complete with 7 metre cable.
Weatherman antenna (with 7 metre cable) included with weatherman
Spare antenna with 7 metre cable
Clipper Log master display
Replacement Clipper Log master display unit
Technical Specifications
- 40mm high digits
- Speed (Knots/m.p.h.)
- Trip Distance (N.Miles / Miles)
- Total Distance (N.Miles / Miles)
- Trend indicator shows acceleration / deceleration
- Selectable speed averaging
- Tactile keypad
- NMEA 0183 output VHW & VLW
- Consumption 10mA + 10mA for display backlight
Spare Shunt 100 Amp
50 millivolt 100 Amp shunt for Clipper BM-1, BM-1 Compact and BM-1 Bluetooth
ct
Spare Shunt 200 Amp
50 millivolt 200 Amp shunt for Clipper BM-2 and BM-2 Compact
Depth Transducer (with 7 metre cable)
Spare 150kHz depth transducer with 7 metre cable
Complete Paddle Wheel Unit
Spare complete log impellor unit with skin fitting and 7 metre cable
Paddle Log Impellor unit without skin fitting
Spare log impellor unit with 7 metre cable
20 metre wind extension cable (for 5 wire masthead unit)
20 metre long extension cable for MK1 – 5 wire wind instruments.
Note there are two versions available:
Version 1 has PLUG for display connection.
Version 2 has TERMINAL BLOCK for display connection.
Antenna rail mount bracket
Mounting bracket for 25mm horizontal rail
to suit Series 2 Navtex, Weatherman, Navtex 518Khz and HF antennae.
20 Metre Wind cable – spare (V1 FIVE WIRE)
Spare 20 metre cable as supplied as standard for MK1 – 5 wire Clipper, Target and Cruiser Wind. It has the masthead connector at one end, the other end is stripped and tinned wires.
Paddlewheel + spindle
Spare paddlewheel and spindle, simple fit for all Clipper, Target and Cruiser Logs.
V2 MHU Connetor block
Spare connector block for connecting 3 wire Wind display units to the 3 wire Masthead unit cable.
Wind Anemometer Cup Kit
Spare anemometer cup assembly with fixings and illustrated fitting instructions
Select correct type for your model
Type – Clipper, Target, Cruiser Wind Version 1 – five wire mast head units*
*If your mast unit has or had a red coloured wind vane fin you require the Version 1 – five wire type.
Type – Clipper, Target, Cruiser Wind Version 2 – three wire mast units, Wireless and Tactical masthead units*
*If your mast unit has or had a red coloured wind vane fin you require the Version 1 – five wire type.
Wind vane kit
Spare wind vane assembly with fixings and illustrated fitting instructions
For Clipper, Target, Cruiser and Wireless, Tactical masthead units
IMPORTANT – Select correct type for your model
Clipper / Target / Cruiser Version 1 – five wire mast unit
Clipper / Target / Cruiser Version 2 – three wire / Wireless / Tactical mast unit
SHUNT CABLE 100 AMP
Spare 100 Amp shunt cable for the Clipper BM-1, BM-1 Compact or the BM-1 Bluetooth
SHUNT CABLE 200 AMP
Spare 200 Amp shunt cable for the Clipper BM-2 and BM-2 Compact battery monitors
Spare 20 metre V2 Wind masthead cable – (V2 THREE WIRE)
Replacement 20 metre mast cable for the Clipper, Target and Cruiser V2 three wire wind systems.
Spare antenna base bracket
Spare antenna base bracket with new ‘O’ ring and cable gland
Electromagnetic Log skin fitting
Spare skin fitting for Electromagnetic Log transducer. Supplied with rubber sealing ring and retaining nut.
Clipper Clamp Bracket for Clipper cockpit instruments
Spare clamp bracket for Clipper cockpit instruments. Fits Clipper Depth, Log, Duet, Wind, BM-1 etc.
Electromagnetic Transducer Blanking Plug
Spare blanking plug to seal the skin fitting when cleaning the electromagnetic transducer.
Supplied as original equipment.
Spare M5 wing nuts (pack of 4)
Pack of 4 x stainless steel wing nuts as fitted to Clipper, Target and Cruiser instruments.
Spare side mount knobs
Pair of trunnion knobs to mount the Target Navtex and Stingray Echo sounder to their respective stirrup mounting bracket.
Target Navtex Mount Bracket
spare Stirrup mounting bracket for Target Navtex
(Supplied as original equipment with Target Navtex)
Spare paddlewheel ‘O’ rings (pair)
Pair of replacement ‘O’ rings for the paddlewheel log transducer
Supernova Combi Switch assembly
Spare pre-wired switch for the Supernova Combi LED light
Clamp bracket for Clipper cabin instruments
Spare clamp bracket for Clipper cabin instruments. Fits Clipper – AIS Plotter, Navtex, Weatherman, MOBi and Meteoman.
Spare V2 20 metre wind masthead cable
20 metre long cable as supplied as original equipment for the V2 three wire Clipper, Target and Cruiser Wind systems. Fitted with moulded plug to connect to the short masthead unit cable. The other end is prepared to connect to the display unit.
Note – this is incompatible with 5 wire mast units.
Wind – Mast Mounting Tube
Spare mounting tube for 3 wire and wireless wind masthead units. (not suitable for 5 wire systems)
HF3W SSB Receiver
TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the entire spectrum between 30Khz to 30Mhz. For those new to single side band reception the unit comes complete with everything needed to ‘get on the air’ including a comprehensive instruction manual which includes a list of useful marine frequencies.
Controls on the front of the receiver change reception mode, from a narrow filter for SSB reception to a wide filter which enables high quality audio signals to be heard from broadcast stations around the world. They also control ten memory channels to store your favourite frequencies.
The large, clear liquid crystal display shows the precise frequency tuned to and there is no need for constant ‘correcting’ with the tuning knob so often associated with SSB signals as the receiver
is fully synthesised.
TARGET HF3/P
The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic long wire antenna, 12 volt power cable and instruction book.
TARGET HF3/W
The HF3/W is complete with CD software and interface cable for connection to a PC sound card. The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex. Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world.
Requires PC Windows XP to 10.
