Target     HF3P & HF3W Receiver
line line






Get Adobe
 Target HF3
TARGET HF3/P & HF3/W
             
SELECT
Description
Technical Specs
Spares/Accessories

     
                             

TARGET HF3/P & HF3/W
The Target HF3 is a masterpiece of R. F. engineering covering the
entire spectrum between 30Khz to 30Mhz. For those new to single
side band reception the unit comes complete with everything
needed to 'get on the air' including a comprehensive
instruction manual which includes a list of useful marine frequencies.
Controls on the front of the receiver change reception mode, from
a narrow filter for SSB reception to a wide filter which enables high
quality audio signals to be heard from broadcast stations around
the world. They also control ten memory channels to store your
favourite frequencies.

The large, clear liquid crystal display shows the precise frequency
tuned to and there is no need for constant 'correcting' with the
tuning knob so often associated with SSB signals as the receiver
is fully synthesised.
TARGET HF3/P
The Target HF3/P has a fixed level audio output to connect to third party weatherfax software. The receiver is supplied complete with a basic wire antenna, 12 volt mains power supply, seperate 12 volt power cable and instruction book.
Target HF3/W
The HF3/W is complete with CD software and interface cable for connection to a PC sound card.

The software enables reception of weatherfax pictures, Radiotelex weather forecasts and Navtex.

Simply install the software, plug in the supplied cable to the receiver output and PC sound card to receive weatherfax pictures and forecasts from around the world.

Technical Specifications
  • Signal level indicator
  • Fully synthesised
  • Frequency range - 30Khz - 30Mhz
  • Modes - USB/AM/LSB
  • Single side band - 3.8Khz wide
  • 10 memory channels
  • AM - 6Khz wide
  • Audio output - 2 watts
  • Power supply - 12 volts DC
  • Power consumption - 300mA
  • Dimensions - Width 180mm, Height 58mm, Depth 170mm